• Login
Limited Lifetime Warranty

BB-FOSTCDRI-PH-SC Serial Converter, RS-232/422/485 TB to SM Fiber SC, Ind. Panel, C1D2

  • Converts serial data signals to multi- or single-mode fiber
  • 2 KV, 3-way isolation (input, output, power circuits)
  • Data rate: 9.6 to 115.2 kbps (bit-wise enable)
  • -40 to +85°C wide operating temperature
  • IP30 metal panel mount case (DIN rail adaptable)
  • FCC, CE, IEC-61850-3, IEEE 1613, UL C1/D2
  • 10-48 VDC power source required (not included, sold separately)
  • Note: 2 units required to extend data via fiber optic connection (see datasheet)
Certifications CE FCC modbus RoHS
In Stock: : 6
Add to Cart Buy Now

More Description

Model FOSCTDRI-PH-SC is a premium heavy industrial serial-to-fiber optic converter. Designed for rugged industrial environments, it has been put through some of the most exacting compliance testing in the industry. Meeting IEC 61850-3 and IEEE 1613 requirements, it is suitable for installation in electrical substations. These specifications are more stringent than NEMA TS1/TS2 requirements for transportation applications. Powerful isolation protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third level of protection. An external 10-48 VDC power source is required (not included, sold separately). Packaged in a rugged IP30 metal case, this converter converts serial signals to single-mode fiber optic. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch. In addition to direct point-to-point connectivity, operation in multi-drop mode is possible. This enables serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add the EMI / RFI protection inherent to fiber optic communications. Note: These converters use a proprietary modulated fiber optic signal. Two units are required to extend the data via the fiber optic connection. Any FOSTCDRi-PH-x converter can (only-) connect to another FOSTCDRi-PH-x converter model at the other end of the fiber optic cable.

Accessory Products

BB-FOSTCDRI-PH-SC

Products:BB-FOSTCDRI-PH-SC

Serial Converter, RS-232/422/485 TB to SM Fiber SC, Ind. Panel, C1D2

Accessory Products

  • 24W, 24VDC, 1A, AC-DC Single Output DIN Power Supply, Slim Plastic Case

    $56.25
  • Replacement TB - 5-position, 5.08mm, 8A, 300V (QTY 1)

    $15.45

{{relatedTitle}}

Products + {{numOfSelectedRelatedProducts}}Accessory Products

Subtotal {{subTotalStr}}

Extended Specifications

General

  • Technology Serial
  • Power 10-48VDC
  • Mounting Panel
  • Temperature -40 to 85C
  • Serial Type RS-232/422/485
  • Serial Connector Terminal Block
  • Fiber Type Single-mode

Display (B)

  • LED Indicators Communication and Power

Power Supply (X)

  • Power Requirement 10~48 VDC

General (X)

  • Humidity (B) 0 ~ 95%, non-condensing
  • Interface Fiber Optic to RS-232/422/485
  • Isolation Protection 2000 VDC
  • Communication Speed Serial: From 9.6 to 115.2 kbps
  • Connector Plug-in 5P/15P screw terminal blocks

Environment

  • Temperature (Storage Range) -40~85°C (40~185 °F)
  • Temperature (Operating Range) -40~85°C (40~185 °F)
x
Office Locations

1-800-346-3119

Monday-Friday, 7am-5pm CST

Contact Advantech