• Login
Limited Lifetime Warranty

BB-485COSR Serial Converter, RS-232 DB25F to RS-485 DB25M

  • Converts RS-232 TD and RD to balanced RS-485
  • Extend RS-232 data signals up to 1.2 km (4000 ft)
  • Data rate: up to 115.2 Kbps baud
  • 12 Vdc power supply required (not included, sold separately)
  • DB25 F / DB25 M
Certifications CE FCC RoHS

List Price: $89.30
10% off until the 6/30/2021

Add to Cart Buy Now

More Description

Model 485COSR, RS-232 to RS-485 converter, converts unbalanced, full-duplex RS-232 signals to balanced full-duplex (4-wire) or half-duplex (2-wire) RS-485 signals. The RS-232 port has a female DB25S connector with pins 2 (TD input) and 3 (RD output) supported. Protective Ground (pin 1) and Signal Ground (pin 7) are also passed through. Pins 4 (RTS) and 5 (CTS) are tied together. Pins 6 (DSR), 8 (CD), and 20 (DTR) are tied together, but not passed through the converter. The RS-485 port has a male DB25P connector with Send Data outputs on pins 2 and 14, and Receive Data inputs on pins 3 and 16, or 5 and 17. No special software requirements are needed since the RS-485 driver is enabled by the first transition on the RS-232 side of the Transmit Data line (Pin 2). Any transmission on the TD line keeps the RS-485 driver enabled by preventing the mono-stable multi-vibrator from timing out. The transmitter is disabled approximately 1 ms after the last transmitted character. This 1 ms timeout allows continuous transmission of data at 9600 baud or higher. A 12 VDC external power supply is required (not included, sold separately).

Accessory Products

BB-485COSR

Products:BB-485COSR

Serial Converter, RS-232 DB25F to RS-485 DB25M

Accessory Products

  • 12VDC Output, 0.5A Current, 6W Power, J

    $28.10

{{relatedTitle}}

Products + {{numOfSelectedRelatedProducts}}Accessory Products

Subtotal {{subTotalStr}}

Extended Specifications

General

  • Technology Serial
  • Power 12VDC
  • Mounting Inline
  • Temperature 0 to 70C
  • Serial Type RS-422/485
x
Office Locations

1-800-346-3119

Monday-Friday, 7am-5pm CST

Contact Advantech